Order Products : sales@su-jiao.com
MAJORIS EW460
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | afTTeA_MAJORIS-EW460.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EW460 is a 40% fiber / mineral filled polypropylene copolymer compound intended for injection moulding. The product is available in both black (EW460 - 8229) and natural (EW460) but other colours can be provided on request. EW460 has been developed especially for the applications appliances and electrical components. APPLICATIONS Products requiring good rigidity, low shrinkage, high dimensional stability can suitably be made from EW460. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.20 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 11 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.20 - 1.0 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus - 1% Secant | 2500 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 50 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 130 | °C | ISO 75-2/B |
| Ball Pressure Test (138°C) | Pass | NF C 61-303 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 | |
| Glow Wire Flammability Index (2.00 mm) | 750 | °C | IEC 60695-2-12 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 220 - 270 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Holding pressure: 50 to 70% of the injection pressure |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PP H7701 | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| TOTAL Polypropylene PPC 10642 | TOTAL Refining & Chemicals | PP Impact Copolymer | TOTAL Polypropylene |
| Andur 1-75 DP/Curene® 442 | Anderson Development Company | PUR-Ether/TDI | Andur |
| Lupox® TE5000H | LG Chem Ltd. | PC+PBT | Lupox® |
| Sylvin 3260-80 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
