Order Products : sales@su-jiao.com

Shin-Etsu Elastomer KEG-2000-40A/B

Category:	Silicone Rubber, HTV , Silicone Rubber, HTV
Manufacturer:	Shin-Etsu Silicones of America
Trademark:	Shin-Etsu Elastomer
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	0GrCvY_Shin-Etsu-Elastomer-KEG-2000-40A-B.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Shin-Etsu KEG2000-40 is a fast cure type liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KEG2000-40 is low enough to allow easy pumping through most injection molding systems. High tear strength Rapid cure time at elevated temperature Long pot life at room temperature Typical Applications O-Rings Diaphragms Capping Rubber Rollers Connector packaging Other electrical parts ClassVI certification

Message

Shin-Etsu KEG2000-40 is a fast cure type liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KEG2000-40 is low enough to allow easy pumping through most injection molding systems.

High tear strength

Rapid cure time at elevated temperature

Long pot life at room temperature

Typical Applications

O-Rings

Diaphragms

Capping

Rubber Rollers

Connector packaging

Other electrical parts

ClassVI certification

General Information
Features	Low viscosity Workability, good Fast curing Good tear strength
Uses	Electrical components Diaphragm Roller Shield Connector
Agency Ratings	FDA not rated USP Class VI
Processing Method	Liquid Injection Molding (LIM)

Physical	Nominal Value	Unit
Specific Gravity	1.13	g/cm³

Hardness	Nominal Value	Unit
Durometer Hardness	41

Elastomers	Nominal Value	Unit
Tensile Stress (100% Strain)	1.23	MPa
Tensile Strength	9.60	MPa
Tensile Elongation (Break)	640	%
Tear Strength ¹	32.0	kN/m
Compression Set (180°C, 22 hr)	6.0	%

Thermoset	Nominal Value	Unit
Shelf Life (32°C)	26	wk
Post Cure Time (200°C)	4.0	hr

Additional Information
Press / Post Cure: Press/Post

Uncured Properties	Nominal Value	Unit
Curing Time	0.083	hr

Note Message
1 .	B mould

Resin Grade	Manufacturer	Category	Trademark
RTP 1303 C	RTP Company	PPS	RTP
Shuang-Bang CM-8205N	Shuang-Bang Industrial Corp.	Film, TPU	Shuang-Bang
Karina BLACK PVC COMPOUND 105751-48/ 1-B-AC-LMP	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
Karina IVORY PVC COMPOUND -E 830-35/ 1-Y-ERYB-LMP	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
LNP™ THERMOTUF™ IX02582 compound	SABIC Innovative Plastics	Nylon 612	LNP™ THERMOTUF™