Order Products : sales@su-jiao.com
Ultramid® HFX 35
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | BASF Corporation |
| Trademark: | Ultramid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zxhvI9_Ultramid-HFX-35.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Ultramid HFX 35 is a polyamide specialty extrusion resin combining high flexibility, outstanding chemical resistance and enhanced heat stability. Applications Ultramid HFX 35 is recommended for pipe and tubing applications requiring high melt strength and flexibility. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.13 | g/cm³ | ISO 1183 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 1180 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 48.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield, 23°C) | 30 | % | ISO 527-2 |
| Nominal Tensile Strain at Break (23°C) | 200 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 1050 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 12 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 48.0 | °C | ISO 75-2/A |
| Melting Temperature (DSC) | 220 | °C | ISO 3146 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Cylinder Zone 1 Temp. | 225 - 245 | °C | |
| Cylinder Zone 3 Temp. | 225 - 250 | °C | |
| Cylinder Zone 5 Temp. | 225 - 245 | °C | |
| Flange temperature | 230 - 245 | °C | |
| Head Temperature | 230 - 245 | °C | |
| Extruder Screw L/D Ratio | 20.1:1.0 to 24.0:1.0 | ||
| Extruder Screw Compression Ratio | 3.5:1.0 to 4.0:1.0 | ||
| Melt Temperature | 225 - 245 | °C | |
| Die Temperature | 230 - 245 | °C |
| Extrusion instructions |
|---|
| Screw Parameters Metering Section : 40% Transition Section : 3 to 4 flights Feed Section : balance of screw length |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong PA1212 Reinforced Nylon 1212 | Shandong Guangyin New Materials Co., Ltd. | Nylon 1212 | Shandong PA1212 |
| Telcar® SGI50050 | Teknor Apex Asia Pacific PTE. LTD. | TPE | Telcar® |
| Artenius MB01 | Artenius | PET | Artenius |
| Exceed™ 1018HA | ExxonMobil Chemical | mPE | Exceed™ |
| Kingfa PBT R0N | Kingfa | PBT | Kingfa PBT |
