Order Products : sales@su-jiao.com
Marlex® C300
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | Chevron Phillips Chemical Company LLC |
| Trademark: | Marlex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zuelmC_Marlex-C300.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Marlex® C300 is a Medium Density Polyethylene material. It is available in Latin America or North America for blow molding. Important attributes of Marlex® C300 are:
Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.933 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.90 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | |||
| 100% Igepal, Compression Molded, F50 | 1000 | hr | ASTM D1693A |
| 100% Igepal, Compression Molded, F50 | > 1000 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Compression Molded) | 18.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, Compression Molded) | 800 | % | ASTM D638 |
| Flexural Modulus - Tangent 3(Compression Molded) | 720 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -75.0 | °C | ASTM D746A |
| Note Message | |
|---|---|
| 1 . | Type IV, 51 mm/min |
| 2 . | Type IV, 51 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultracast™ AL Red Label | Hapco Inc. | Epoxy | Ultracast™ |
| BESTDUR TPHG6/01 | Triesa Plastics | PBT+PET | BESTDUR |
| Fluon® PFA P-66P | Asahi Glass Co., Ltd. | PFA | Fluon® |
| Grilamid® L 25 G nat 6011 | EMS-GRIVORY | Nylon 12 | Grilamid® |
| Sylvin 9080-55 BLACK | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
