Order Products : sales@su-jiao.com
TechnoFin HDPE-10
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | TechnoCompound GmbH |
| Trademark: | TechnoFin |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ztk5mk_TechnoFin-HDPE-10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TechnoFin compounds with variable flow behaviour, good workability, possess good damping characteristics, high rigidity and very good abrasion behaviour. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.04 | g/cm³ | ISO 1183 |
| Melt Volume-Flow Rate (MVR) | 10.0 | cm³/10min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1300 | MPa | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 12 | kJ/m² | ISO 179/1eA |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+3 | ohms·cm | IEC 60093 |
| Additional Information |
|---|
| Charpy Notched Impact Strength, ISO 179, 23°C, Type 1, Edgewise, Notch A: >12 kJ/m²Volume Resistivity, IEC 60093: <1e3 ohm-cm |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 230 - 270 | °C | |
| Mold Temperature | 30.0 - 90.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULAFORM® 9 E HI | A. Schulman Europe | Acetal (POM) Copolymer | SCHULAFORM® |
| Shin-Etsu RTV KE-1842 | Shin-Etsu Silicones of America | Silicone Rubber, RTV-1 | Shin-Etsu RTV |
| TECHNYL® C 442 BLACK V | Solvay Engineering Plastics | Nylon 6 | TECHNYL® C |
| Grivory® GV-6 FWA black 9225 | EMS-GRIVORY | Nylon 66+Nylon 6I/X | Grivory® |
| Karina IVORY PVC COMPOUND BTR-85/200-D-IS-BS | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
