Order Products : sales@su-jiao.com
Latan 13 E71
| Category: | Acetal (POM) Copolymer , Acetal (POM) Copolymer |
| Manufacturer: | LATI S.p.A. |
| Trademark: | Latan |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zs3xw5_Latan-13-E71.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Compound based on Polyoximethylene (POM). Toughened. Medium viscosity. Very high toughness properties and impact resistance. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.34 | g/cm³ | ISO 1183 |
| Molding Shrinkage 1 | ISO 294-4 | ||
| Across Flow : 2.00 mm | 2.4 to 2.8 | % | |
| Flow : 2.00 mm | 2.3 to 2.7 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ISO 527-2/1 | ||
| 23°C | 1500 | MPa | |
| 60°C | 900 | MPa | |
| 90°C | 500 | MPa | |
| Tensile Stress | ISO 527-2/5 | ||
| Yield, 23°C | 35.0 | MPa | |
| Yield, 60°C | 25.0 | MPa | |
| Yield, 90°C | 15.0 | MPa | |
| Break, 23°C | 35.0 | MPa | |
| Tensile Strain | ISO 527-2/5 | ||
| Yield, 23°C | 15 | % | |
| Break, 23°C | 100 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 10 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | No Break | ISO 179/1eU | |
| Notched Izod Impact (23°C, 3.20 mm) | 100 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 125 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 65.0 | °C | ISO 75-2/A |
| Continuous Use Temperature 2 | 65.0 | °C | |
| Vicat Softening Temperature | 125 | °C | ISO 306/B50 |
| CLTE - Flow (30 to 100°C) | 8.0E-5 | cm/cm/°C | ASTM D696 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 to 90.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 175 to 200 | °C | |
| Mold Temperature | 60.0 to 90.0 | °C | |
| Injection Rate | Moderate |
| Note Message | |
|---|---|
| 1 . | at 60 Mpa of cavity pressure |
| 2 . | 20,000 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8250-75 Natural | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| NORDEL™ IP 3640N | The Dow Chemical Company | EPDM | NORDEL™ |
| Altuglas® MI-2T | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Altuglas® |
| Axiall PVC 7941 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| EPO-TEK® E3001-6 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
