Order Products : sales@su-jiao.com
DuraGrip® DGR 6250CL
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Advanced Polymer Alloys |
| Trademark: | DuraGrip® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zrEUgA_DuraGrip-DGR-6250CL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DuraGrip® 6250CL is a Thermoplastic Elastomer (TPE) designed for injection molding and extrusion processes. DuraGrip® 6250CL has excellent clarity, soft-touch feel, a high coefficient of friction, and bonds well to polypropylene. DuraGrip® 6250CL is also FDA compliant pursuant to 21 C.F.R. 177.2600. DuraGrip® 6250CL is not hygroscopic and under normal conditions does not require drying. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.883 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 31 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 50 | ASTM D2240, ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412, ISO 37 | ||
| 100% strain | 1.54 | MPa | ASTM D412, ISO 37 |
| 300% strain | 2.27 | MPa | ASTM D412, ISO 37 |
| Tensile Strength (Yield) | 6.85 | MPa | ASTM D412, ISO 37 |
| Tensile Elongation (Break) | 800 | % | ASTM D412, ISO 37 |
| Tear Strength 1 | 23.6 | kN/m | ASTM D624 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (190°C, 200 sec^-1) | 136 | Pa·s | ASTM D3835 |
| Additional Information |
|---|
| The value listed as Density -Specific Gravity, ASTM D792, was tested in accordance with ASTM D471.The value listed as Density, ISO 1183, was tested in accordance with ISO 2781. |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Monprene® CP-19078 | Teknor Apex Company | TPE | Monprene® |
| Unichem 9273E | Colorite Polymers | PVC, Unspecified | Unichem |
| LITEN PL 10 | UNIPETROL RPA | PE Copolymer | LITEN |
| WELLAMID Nylon 6600 GV 30 HWUVCP | CP-Polymer-Technik GmbH & Co. KG | Nylon 66 | WELLAMID Nylon |
| POCAN® T 7323 POS151 000000 | LANXESS GmbH | PBT+PET | POCAN® |
