Order Products : sales@su-jiao.com
ADMER™ AT1707E
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Mitsui Chemicals Europe GmbH |
| Trademark: | ADMER™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zqqnUK_ADMER-AT1707E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ADMER® AT1707E is an maleic anhydride grafted tie resin based on PE-LLD for multilayer high-speed PE-cast film and structures with PA, EVOH or Aluminum. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.3 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 42 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 6.50 | MPa | |
| Break | 12.3 | MPa | |
| Tensile Elongation (Break) | > 500 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (Area) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 64.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Xuchuan XCY-5512 | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| YUCLAIR® FT411 | SK Global Chemical | LLDPE | YUCLAIR® |
| Adell Polyamide AR-32 | Adell Plastics, Inc. | Nylon 66 | Adell Polyamide |
| Iupilon® TMB1615 | Mitsubishi Engineering-Plastics Corp | PC+ABS | Iupilon® |
| Plaslube® PEEK CF20 TL15 HF | Techmer Engineered Solutions | PEEK | Plaslube® |
