Order Products : sales@su-jiao.com
RTP 2800 B-40D
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zqUgks_RTP-2800-B-40D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 1.5 to 1.8 | % | ASTM D955 |
| Moisture Content | 0.080 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 40 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 3.20 mm) | 11.4 | MPa | ASTM D412 |
| Tensile Elongation 2(Yield) | 700 | % | ASTM D412 |
| Tear Strength 3 | 61.3 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79.4 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Dew Point | -17.8 | °C | |
| Processing (Melt) Temp | 216 to 227 | °C | |
| Mold Temperature | 15.6 to 79.4 | °C | |
| Injection Pressure | 82.7 to 124 | MPa |
| Note Message | |
|---|---|
| 1 . | Die C, 500 mm/min |
| 2 . | Die C, 500 mm/min |
| 3 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Royalite R59 | Spartech Plastics | ABS+PVC | Royalite |
| Ultramid® A3K FC Aqua UN | BASF Corporation | Nylon 66 | Ultramid® |
| Nymax™ 1010 A Natural | PolyOne Corporation | Nylon 6 | Nymax™ |
| HiFill® PA6 0177 B | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| MAJORIS DT400 - 8229 | AD majoris | PP, Unspecified | MAJORIS |
