Order Products : sales@su-jiao.com
Fiberfil® M-2450
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Fiberfil® Engineered Plastics Inc. |
| Trademark: | Fiberfil® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zndx9S_Fiberfil-M-2450.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Fiberfil®M-2450 is a polypropylene copolymer (PP Copoly) material,. This product is available in North America,. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.06 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 1.0 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.020 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 26.2 | MPa | ASTM D638 |
| Tensile Elongation (Yield, 23°C) | 77 | % | ASTM D638 |
| Flexural Modulus - Tangent (23°C) | 1450 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 40.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 25 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 95.0 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 57.2 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 199 - 210 | °C | |
| Middle Temperature | 204 - 227 | °C | |
| Front Temperature | 182 - 199 | °C | |
| Nozzle Temperature | 182 - 193 | °C | |
| Processing (Melt) Temp | 199 - 232 | °C | |
| Mold Temperature | 37.8 - 71.1 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.345 | MPa |
| Injection instructions |
|---|
| Screw speed: Medium to Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 383 SI HF | RTP Company | PC | RTP |
| TAROMID A 280 H MG6 DX0 | Taro Plast S.p.A. | Nylon 66 | TAROMID A |
| Fainplast PVC PM 7010/S | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| Iupilon® CLS400 | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
| LNP™ LUBRICOMP™ DL003EU compound | SABIC Innovative Plastics | PC | LNP™ LUBRICOMP™ |
