Order Products : sales@su-jiao.com
RTP 4007 UP
| Category: | PPA , Polyphthalamide |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zmVl7V_RTP-4007-UP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
"Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade." |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.55 | g/cm³ | ISO 1183 |
| Moisture Content | 0.050 | % |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Primary Additive | 40 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 16500 | MPa | ISO 527-2 |
| Tensile Stress | 260 | MPa | ISO 527-2 |
| Tensile Strain (Yield, Injection Molded) | 2.3 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 15000 | MPa | ISO 178 |
| Flexural Stress (Injection Molded) | 385 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 1(Injection Molded) | 13 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength 2(Injection Molded) | 70 | kJ/m² | ISO 180/1U |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Data listed is for natural or black colored materials. Pigments can affect properties.Desiccant Type Dryer Required. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 105 | °C | |
| Drying Time - Desiccant Dryer | 4.0 - 6.0 | hr | |
| Dew Point | -30.0 | °C | |
| Processing (Melt) Temp | 300 - 330 | °C | |
| Mold Temperature | 135 - 160 | °C | |
| Injection Pressure | 70.0 - 125 | MPa |
| Note Message | |
|---|---|
| 1 . | 4mm thickness |
| 2 . | 4mm thickness |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P1740 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| ACCUTECH™ HP0336T40L1 | ACLO Compounders Inc. | PP Homopolymer | ACCUTECH™ |
| Ferro PP LPP50BC73NA | Ferro Corporation | PP Homopolymer | Ferro PP |
| Generic PPA - Glass Fiber, Long | Generic | PPA | Generic |
| Latishield 87/28-10A G/20 | LATI S.p.A. | PC | Latishield |
