Order Products : sales@su-jiao.com
Generic TEEE - Glass Fiber
| Category: | TEEE , Thermoplastic Elastomer, Ether-Ester |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zgw3m6_Generic-TEEE---Glass-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic TEEE - Glass Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 - 1.47 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.10 - 0.70 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 414 - 3310 | MPa | ASTM D638 |
| Tensile Strength (23°C) | 42.4 - 43.4 | MPa | ASTM D638 |
| Tensile Elongation (Yield, 23°C) | 7.3 - 20 | % | ASTM D638 |
| Flexural Modulus (23°C) | 345 - 2550 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 12.1 - 75.8 | MPa | ASTM D790 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 - 105 | °C | |
| Processing (Melt) Temp | 224 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic TEEE - Glass FiberThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RheTech Polypropylene T10P250-00 | RheTech, Inc. | PP Copolymer | RheTech Polypropylene |
| Sarlink® TPE EE-2245N | Teknor Apex Company | TPE | Sarlink® TPE |
| TechnoFin TV 20 | TechnoCompound GmbH | PP, Unspecified | TechnoFin |
| 陶氏低密度聚乙烯 208C | The Dow Chemical Company | LDPE | DOW™ LDPE |
| Vipel® K010-TBE-30 | AOC, L.L.C. | Vinyl Ester | Vipel® |
