Order Products : sales@su-jiao.com
SD POLYCA™ CF5101V
| Category: | PC , Polycarbonate |
| Manufacturer: | Sumika Styron Polycarbonate Limited |
| Trademark: | SD POLYCA™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zevKIc_SDPOLYCACF5101V.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SD POLYCA CF5000 series are carbon fiber reinforced grades. These grades give very high flexural strength and flexural modulus, and suitable for housing of electronic products. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Part Marking Code |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.23 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 0.10 - 0.30 | % | ASTM D955 |
| Transverse flow | 0.30 - 0.50 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.15 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 123 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 7500 | MPa | ISO 527-2 |
| Tensile Strength | 108 | MPa | ASTM D638, ISO 527-2 |
| Tensile Elongation (Break) | 4.0 | % | ASTM D638, ISO 527-2 |
| Flexural Modulus | |||
| -- | 6080 | MPa | ASTM D790 |
| -- | 7000 | MPa | ISO 178 |
| Flexural Strength | 167 | MPa | ASTM D790, ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 7.0 | kJ/m² | ISO 179 |
| Notched Izod Impact (23°C) | 78 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, not annealed | 146 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 142 | °C | ASTM D648, ISO 75-2/A |
| Linear thermal expansion coefficient | ASTM D696 | ||
| Flow | 2.0E-5 | cm/cm/°C | ASTM D696 |
| Lateral | 6.0E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+3 | ohms·cm | IEC 60093 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MAXAMID™ PA66G43-BK10 | Pier One Polymers, Inc. | Nylon 66 | MAXAMID™ |
| AvaSpire® AV-722 SL30 | Solvay Specialty Polymers | PAEK | AvaSpire® |
| ESAN® GFR 20 | EMAS Plastik San.Tic.AS. | SAN | ESAN® |
| Iupilon® GSH2020DF | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
| ESTOPLAST XU 150NN02 | Ester Industries Ltd. | Nylon 6 | ESTOPLAST XU |
