Order Products : sales@su-jiao.com
KRATON® G1641 H
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | za5Kh4_KRATON-G1641-H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton G1641 H is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 33%. It is supplied from North America in the physical form identified below.
Kraton G1641 H is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Antioxidant Additive 1 | 0.030 to 0.10 | % | Internal Method |
| Polystyrene Content | 32 to 34 | % | Internal Method |
| Total Extractables | < 1.6 | % | Internal Method |
| Viscosity - Toluene, 25%wt (25°C) (25°C) | 500 to 850 | mPa·s | Internal Method |
| Volatile Matter | < 0.50 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec, Compression Molded) | 52 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 2(300% Strain) | 4.34 | MPa | Internal Method |
| Tensile Strength 3(Yield) | > 17.2 | MPa | Internal Method |
| Tensile Elongation 4(Break) | > 800 | % | Internal Method |
| Note Message | |
|---|---|
| 1 . | Non-staining phenolic antioxidant |
| 2 . | Measured on solution cast film from toluene |
| 3 . | Measured on solution cast film from toluene |
| 4 . | Measured on solution cast film from toluene |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Reny® 1012H | Mitsubishi Engineering-Plastics Corp | PARA | Reny® |
| Ferro PP NPP00GT01NA | Ferro Corporation | PP, Unspecified | Ferro PP |
| HiFill® PA6/6 GF30 HS L BK | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| Panlite® G-3110PH | TEIJIN LIMITED | PC | Panlite® |
| DURANEX® CN7030LN/LB | Polyplastics Co., Ltd. | PBT | DURANEX® |
