Order Products : sales@su-jiao.com
Arlon® 45N
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Arlon-MED |
| Trademark: | Arlon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zXACUO_Arlon-45N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Arlon 45N is a tough, high Tg (175°C by DSC) multifunctional epoxy laminate and prepreg system designed for use in a variety of higher layer count MLB's. Processeable using conventional FR-4 conditions, 45N is supplied to meet the requirements of IPC-4101/24. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.85 | g/cm³ | ASTM D792A |
| Water Absorption (24 hr) | 0.10 | % | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 19300 | MPa | Internal Method |
| Poisson's Ratio 1 | 0.20 | ASTM D3039 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peel Strength | Internal Method | ||
| -- 2 | 1.4 | kN/m | |
| -- 3 | 1.4 | kN/m | |
| -- 4 | 1.4 | kN/m |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Expansion Rate (50 to 260°C) 5 | 2.4 | % | Internal Method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | 175 | °C | Internal Method |
| CLTE - Flow | |||
| -- 6 | 1.4E-5 to 1.6E-5 | cm/cm/°C | Internal Method |
| < 175°C 7 | 5.5E-5 | cm/cm/°C | Internal Method |
| > 175°C 8 | 2.0E-4 | cm/cm/°C | Internal Method |
| Thermal Conductivity (100°C) | 0.25 | W/m/K | ASTM E1461 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | Internal Method | ||
| -- 9 | 2.9E+13 | ohms | |
| -- 10 | 4.0E+10 | ohms | |
| Volume Resistivity | Internal Method | ||
| -- 11 | 2.6E+13 | ohms·cm | |
| -- 12 | 3.3E+13 | ohms·cm | |
| Dielectric Strength | 59 | kV/mm | Internal Method |
| Dielectric Constant 13(1 MHz) | 4.40 | Internal Method | |
| Dissipation Factor (1 MHz) | 0.025 | Internal Method | |
| Arc Resistance | 65.0 | sec | Internal Method |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Note Message | |
|---|---|
| 1 . | x and y direction |
| 2 . | After Thermal Stress |
| 3 . | After Process Solutions |
| 4 . | At Elevated Temperatures |
| 5 . | Z-axis |
| 6 . | X-axis |
| 7 . | Z-axis |
| 8 . | Z-axis |
| 9 . | E24/125 |
| 10 . | C96/35/90 |
| 11 . | E24/125 |
| 12 . | C96/35/90 |
| 13 . | Range: 402 to 406 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Wondel® B BR0G6 | Nanjing Julong Engineering Plastics Co., LTD | Nylon 6 | Wondel® B |
| ADDINYL B2H M30 | ADDIPLAST | Nylon 6 | ADDINYL |
| Akulon® K240-HP | DSM Engineering Plastics | Nylon 6 | Akulon® |
| Fenochem R 4700 | Chemiplastica, Inc. | Phenolic | Fenochem |
| Durethan® BTC 65 H3.0 EF 901510 | LANXESS GmbH | Nylon 6 | Durethan® |
