Order Products : sales@su-jiao.com

SCLAIR® 2114

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	NOVA Chemicals
Trademark:	SCLAIR®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	zX5XZu_SCLAIR-2114.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

SCLAIR® 2114 is a Linear Low Density Polyethylene material. It is available in North America for injection molding.

Important attributes of SCLAIR® 2114 are:

Antioxidant

Food Contact Acceptable

Good Aesthetics

Good Flexibility

Good Processability

Typical applications include:

Caps/Lids/Closures

Additive/Masterbatch

Engineering/Industrial Parts

Food Contact Applications

Packaging

General Information
Additive	Antioxidant
Features	Antioxidant Food Contact Acceptable Good Flexibility Good Organoleptic Properties Good Processability High ESCR (Stress Crack Resist.) High Gloss Low Density Low Temperature Impact Resistance Warp Resistant
Uses	Caps Closures Compounding Food Packaging Lids Thin-walled Parts
Agency Ratings	FDA 21 CFR 177.1520(c) 3.1a
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.925	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	52	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal, F50)	< 10.0	hr	ASTM D1693A

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	52		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	10.0	MPa	ASTM D638
Tensile Elongation ²(Break)	100	%	ASTM D638
Flexural Modulus	345	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -70.0	°C	ASTM D746
Vicat Softening Temperature	87.0	°C	ASTM D1525

Additional Information	Nominal Value	Unit	Test Method
Snake Flow	360	mm	Internal Method

Note Message
1 .	50 mm/min
2 .	50 mm/min

Resin Grade	Manufacturer	Category	Trademark
POLYten HDPE S801	Polykemi AB	HDPE	POLYten
PONACOM PE 4412	Ponachem Compound GmbH	HDPE	PONACOM PE
TECHNYL® A 218 V40 NATURAL	Solvay Engineering Plastics	Nylon 66	TECHNYL® A
Delta PPR-1G30	Delta Polymers	PP Homopolymer	Delta
Kynar Flex® 2950-05	Arkema	PVDF	Kynar Flex®