Order Products : sales@su-jiao.com
Moplen EP540V
| Category: | PP Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Moplen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zUHHqP_MoplenEP540V.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Moplen EP540V is a polypropylene block copolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen EP540V is a very high fludity block copolymer as polymerized suitable for compounding applications. Typical applications are compounds for use in automotive interior and exterior trims parts like door panel, inpanel and bumper fascia. Moplen EP540V resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183, ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 110 | g/10 min | ASTM D1238, ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - Secant (23°C) | 1520 | MPa | ISO 527-2/1 |
| Tensile Strength (Yield) | 23.5 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 4.0 | % | ASTM D638 |
| Flexural Modulus 1(6.40 mm) | 1570 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20°C | 2.0 | kJ/m² | ISO 179/1eA |
| 0°C | 2.1 | kJ/m² | ISO 179/1eA |
| 23°C | 2.5 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -20°C | 35 | kJ/m² | ISO 179/1eU |
| 0°C | 37 | kJ/m² | ISO 179/1eU |
| 23°C | 47 | kJ/m² | ISO 179/1eU |
| Notched Izod Impact | ASTM D256 | ||
| -20°C | 25 | J/m | ASTM D256 |
| 23°C | 49 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 102 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 150 | °C | ISO 306/A50 |
| Note Message | |
|---|---|
| 1 . | 30 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® A RV350LW 333 NER 4815 | Radici Plastics | Nylon 66 | Radilon® |
| Melinex® 0 | DuPont Teijin Films U.S. | Polyester, TP | Melinex® |
| TEKNIFLEX® VA15300 | Tekni-Films, a div of Tekni-Plex | Film, PVC/PCTFE | TEKNIFLEX® |
| Virantage® VW-10700 RP, RFP, RSFP | Solvay Specialty Polymers | PESU | Virantage® |
| LUVOCOM® 1-8228 | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
