Order Products : sales@su-jiao.com

Tufel® III 92656

Category:	Silicone , Silicone
Manufacturer:	Momentive Performance Materials Inc.
Trademark:	Tufel® III
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	zU9TRs_Tufel-III-92656.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Tufel III rubber series are biocompatible(1), two component silicone rubber compounds. 92506 and 92656 are 50 and 65 durometer addition curable silicone elastomers that offer low compression set and high resilience with no post bake required for most applications. The combination of these properties may lead to longer service life in highly mechanical applications. The 92506 and 92656 elastomers can be used to produce extruded and calendered parts with excellent permanent set resistance and should be considered for applications such as peristaltic pump tubing, gaskets and seals. Key Features and Benefits Low compression set Excellent elastic memory Biocompatible(1) No post baking required for most applications Low volatile bases minimize porosity Peroxide-free cure system Broad processing window High output rates Tight surface cure Non-blooming Translucency Low hysteresis Potential Applications Healthcare Consumer Goods General Industrial

Message

Tufel III rubber series are biocompatible(1), two component silicone rubber compounds. 92506 and 92656 are 50 and 65 durometer addition curable silicone elastomers that offer low compression set and high resilience with no post bake required for most applications. The combination of these properties may lead to longer service life in highly mechanical applications. The 92506 and 92656 elastomers can be used to produce extruded and calendered parts with excellent permanent set resistance and should be considered for applications such as peristaltic pump tubing, gaskets and seals.

Key Features and Benefits

Low compression set

Excellent elastic memory

Biocompatible(1)

No post baking required for most applications

Low volatile bases minimize porosity

Peroxide-free cure system

Broad processing window

High output rates

Tight surface cure

Non-blooming

Translucency

Low hysteresis

Potential Applications

Healthcare

Consumer Goods

General Industrial

General Information
Features	Biocompatible Low Compression Set Non-Blooming Resilient
Uses	Gaskets Hose Industrial Applications Medical/Healthcare Applications Pump Parts Seals Tubing Valves/Valve Parts
Appearance	Translucent
Processing Method	Calendering Extrusion

Hardness	Nominal Value		Test Method
Durometer Hardness (Shore A)	65		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (100% Strain)	2.60	MPa	ASTM D412
Tensile Strength	8.90	MPa	ASTM D412
Tensile Elongation (Break)	350	%	ASTM D412
Tear Strength ¹	21.0	kN/m	ASTM D624
Compression Set (177°C, 22 hr)	31	%	ASTM D395
Bayshore Resilience	61	%	ASTM D2632

Uncured Properties	Nominal Value	Unit
Density	1.16	g/cm³
Curing Time (177°C)	0.17	hr

Note Message
1 .	Die B

Resin Grade	Manufacturer	Category	Trademark
Mapex AN3620SN	Ginar Technology Co., LTD.	Nylon 6	Mapex
NEXUS PC PC1212FRUV	Nexus Resin Group, LLC.	PC	NEXUS PC
Badamid® LB70 GF30 TM-Z3	Bada AG	Nylon 6	Badamid®
KUBE PIR 22300	KUBE Electronics AG	HDPE	KUBE PIR
TORZEN® G3500HS1L NC01	INVISTA Engineering Polymers	Nylon 66	TORZEN®