Order Products : sales@su-jiao.com
NOVAPOL® LM-0724-A
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | NOVA Chemicals |
| Trademark: | NOVAPOL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zTgtpS_NOVAPOL-LM-0724-A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NOVAPOL® LM-0724-A is a Low Density Polyethylene material. It is available in North America for injection molding. Important attributes of NOVAPOL® LM-0724-A are:
Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.924 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 54 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 12.0 | MPa | |
| Break | 11.0 | MPa | |
| Tensile Elongation 2(Break) | 500 | % | ASTM D638 |
| Flexural Modulus | |||
| 1% Secant | 345 | MPa | ASTM D790 |
| 2% Secant | 305 | MPa | ASTM D3350 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 97.0 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® LDPE 2200H2 | Saudi Basic Industries Corporation (SABIC) | LDPE | SABIC® LDPE |
| Qenos PE HD0390 | Qenos Pty Ltd | HDPE | Qenos PE |
| Wondel® C CR0G4 | Nanjing Julong Engineering Plastics Co., LTD | PC Alloy | Wondel® C |
| Hostacom D1172 9177 | LyondellBasell Industries | Polyolefin, Unspecified | Hostacom |
| Sylvin 916VO-85 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
