| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | BASF Polyurethanes GmbH |
| Trademark: | Elastollan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zQLS0M_Elastollan-560-A-P-TSG.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
|
Thermoplastic Polyester Polyurethane Elastomers with excellent mechanical properties and in particular, good abrasion resistance. Typical applications Shoes, parts subject to regular wear and tear, castor tyres and films. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.22 | g/cm³ | ISO 1183/A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 3 sec) | 50 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 100 | mm³ | ISO 4649-A |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 24.0 | MPa | DIN 53504 |
| Tensile Elongation (Break) | 830 | % | DIN 53504 |
| Tear Strength 1 | 44 | kN/m | ISO 34-1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 175 to 230 | °C | |
| Mold Temperature | 20.0 to 70.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 175 to 220 | °C |
| Note Message | |
|---|---|
| 1 . | Method Bb, Angle (Nicked) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Forprene® 6NM901A50 | SO.F.TER. SPA | TPV | Forprene® |
| MAJORIS CW337 - 7731 | AD majoris | PP Homopolymer | MAJORIS |
| LUVOCOM® NSB 90 BK-2 | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
| ADLEN® G99BG-00 | A.D. Compound S.p.A. | PP Copolymer | ADLEN® |
| Sylvin 9077-75 Red 604 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |