Order Products : sales@su-jiao.com
Estaloc® 59104 RETPU
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estaloc® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zQE40z_Estaloc-59104-RETPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Estaloc® 59104 RETPU is a Polyester-Type Reinforced Engineering Thermoplastic (RETPU). Features: Fast cycling, dimensional stability, durability, aesthetics, low temperature impact Uses: Injection Molding |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.31 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 5 sec) | 65 - 71 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (0.762 mm) | 40.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 0.762 mm) | 40 | % | ASTM D638 |
| Flexural Modulus (0.762 mm) | 1210 | MPa | ASTM D790 |
| Flexural Strength (0.762 mm) | 47.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -40°C, 0.762 mm | 290 | J/m | ASTM D256 |
| 23°C, 0.762 mm | 690 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 95.0 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 61.0 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 210 | °C | |
| Middle Temperature | 215 | °C | |
| Front Temperature | 221 | °C | |
| Nozzle Temperature | 227 | °C | |
| Processing (Melt) Temp | 227 | °C | |
| Injection Pressure | 69.0 - 103 | MPa | |
| Injection Rate | Slow-Moderate | ||
| Holding Pressure | 35.0 - 69.0 | MPa | |
| Back Pressure | 0.345 | MPa | |
| Screw Speed | 30 - 80 | rpm |
| Injection instructions |
|---|
| Air Dew Point: -40°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Selvol™ 15-103 | Sekisui Chemical Company, Ltd. | PVOH | Selvol™ |
| DIOSHY® HG-795-10-4 | DIOSHY Co.,Ltd. | SEBS | DIOSHY® |
| duoMatrix® NEO | Smooth-On, Inc | Unspecified | duoMatrix® |
| Generic PPE+PS+PP - Glass Fiber | Generic | PPE+PS+PP | Generic |
| INELEC PPACF30 | Infinity LTL Engineered Compounds | PPA | INELEC |
