Order Products : sales@su-jiao.com
Polene LDPE ST 1018
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | TPI Polene Public Company Limited |
| Trademark: | Polene LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zOd74m_Polene-LDPE-ST-1018.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polene LDPE ST 1018 is a Low Density Polyethylene material. It is available in Asia Pacific or North America for injection molding. Important attributes of Polene LDPE ST 1018 are:
Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.916 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 30 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 48 | DIN 53505 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 9.50 | MPa | |
| Break | 8.00 | MPa | |
| Tensile Elongation (Break) | 260 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 80.0 | °C | ASTM D1525 |
| Melting Temperature | 100 to 110 | °C | ASTM D1238 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 170 to 210 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Wellamid® GF60-66/6 XE-NBK1 | Wellman Engineering Resins | Nylon 66/6 | Wellamid® |
| Yanshan PE LD103 | SINOPEC Beijing Yanshan Petrochemical | LDPE | Yanshan PE |
| UNITRON® PPS | Nytef Plastics, Ltd. | PEEK | UNITRON® |
| APEX® 2570-H | Teknor Apex Company | PVC, Flexible | APEX® |
| ESTOPLAST XU 225GY37 | Ester Industries Ltd. | Nylon 6 | ESTOPLAST XU |
