Order Products : sales@su-jiao.com
Honeywell PMP R1180
| Category: | PMP , Polymethylpentene |
| Manufacturer: | Honeywell |
| Trademark: | Honeywell PMP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zNNTaO_Honeywell-PMP-R1180.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| The Honeywell R-Series PMP film is made from polymethylpentene. It provides more toughness and heat resistance than standard polyolefins for release film applications. R-Series Film is available in the following colors: Blue and Clear. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.908 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction | ASTM D1894 | ||
| With Metal-Dynamic | 0.60 | ASTM D1894 | |
| With self-dynamics | 1.0 | ASTM D1894 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| secant modulus | ASTM D882 | ||
| MD | 676 | MPa | ASTM D882 |
| TD | 676 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 42.7 | MPa | ASTM D882 |
| TD : Fracture | 40.7 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Fracture | 250 | % | ASTM D882 |
| TD : Fracture | 370 | % | ASTM D882 |
| Water Vapor Transmission | 7.8 | g/m²/24 hr | ASTM E96 |
| Additional Information |
|---|
| Yield: 25852 in²/lbTensile Strength @ Yield, ASTM D 882, MD: 5200 to 7200 psiTensile Strength @ Break, ASTM D 882, TD: 4500 to 6300 psiElongation @ Break, ASTM 882, MD: 200 to 300%Elongation @ Break, ASTM 882, TD: 330 to 400%Secant Modulus, ASTM D 882, MD: 91000 to 105000 psiSecant Modulus, ASTM D 882, TD: 91000 to 105000 psiGraves Tear (initial), ASTM D 1004, MD: 220 to 280 g/milGraves Tear (initial), ASTM D 1004, TD: 220 to 280 g/milDimensional Stability, ASTM D1204, TD, 300°F, 10 min: <2% shrinkageDimensional Stability, ASTM D1204, MD, 300°F, 10 min: <1.5% shrinkageCoef of Friction, ASTM D1894, Vs Metal - Dynamic: 0.5 to 0.7Coef of Friction, ASTM D1894, Vs Itself - Dynamic: 0.8 to 1.2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRIMATOP PP CO 220-23 | Amco Polymers | PP Impact Copolymer | PRIMATOP |
| RX® 1366FR-P | Sumitomo Bakelite North America, Inc. | DAP | RX® |
| VENELENE® FD-0325 | Poliolefinas Internacionales, C.A. (Polinter) | LDPE | VENELENE® |
| Varcum 29316 | Durez Corporation | Phenolic | Varcum |
| Osterlene® LD07520A | Osterman & Company | LDPE | Osterlene® |
