Order Products : sales@su-jiao.com
Generic PBT+PET
| Category: | PBT+PET , Polybutylene Terephthalate + PET |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zMueDE_Generic-PBT-PET.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PBT+PET This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.43 - 1.66 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.43 - 2.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (23°C) | 80 - 120 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 48.0 - 96.7 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 1.8 - 4.3 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2480 - 12100 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 35 - 130 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 205 - 207 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 148 - 199 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 - 150 | °C | |
| Drying Time | 3.0 - 5.0 | hr | |
| Processing (Melt) Temp | 255 - 266 | °C | |
| Mold Temperature | 69.3 - 80.4 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PBT+PETThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vyncolit® RX®1-540 | Vyncolit N.V. | DAP | Vyncolit® |
| ACCUTECH™ HP0334T10L1 | ACLO Compounders Inc. | PP Homopolymer | ACCUTECH™ |
| GXL 10009-X47 | S&E Specialty Polymers, LLC | TPO (POE) | GXL |
| KOPA® KN333G15HI | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
| KMI KM TEC 132 | KMI Group, Inc. | Acrylic (SMMA) | KMI |
