Order Products : sales@su-jiao.com
TECHNYL® C 502XT NATURAL
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Solvay Engineering Plastics |
| Trademark: | TECHNYL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zMMKB4_TECHNYLC502XTNATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TECHNYL® C 502XT is an unreinforced polyamide 6, very high viscosity, for extrusion. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Resin ID (ISO 1043) |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.13 | -- | g/cm³ | ISO 1183/A |
| Water Absorption (23°C, 24 hr) | 1.4 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus (23°C) | 2800 | 900 | MPa | ISO 527-2/1A |
| Tensile Stress (Yield, 23°C) | 80.0 | 35.0 | MPa | ISO 527-2/1A |
| Tensile Strain | ISO 527-2 | |||
| Yield, 23°C | 4.2 | 2.5 | % | ISO 527-2 |
| Fracture, 23°C | 160 | -- | % | ISO 527-2 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Unnotched Impact Strength (23°C) | No Break | -- | ISO 179/1eU | |
| Notched Izod Impact (23°C) | 7.0 | -- | kJ/m² | ISO 180 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Melting Temperature | 222 | -- | °C | ISO 11357-3 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+14 | 1.0E+12 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | 1.0E+13 | ohms·cm | IEC 60093 |
| Dielectric Strength (2.00 mm) | 22 | 18 | kV/mm | IEC 60243-1 |
| Relative Permittivity | 3.40 | 3.90 | IEC 60250 | |
| Comparative Tracking Index (Solution A) | 600 | -- | V | IEC 60112 |
| Extrusion | Dry | Unit | |
|---|---|---|---|
| Suggested Max Moisture | 0.080 | % | |
| Cylinder Zone 1 Temp. | 230 - 250 | °C | |
| Cylinder Zone 2 Temp. | 235 - 255 | °C | |
| Cylinder Zone 3 Temp. | 240 - 260 | °C | |
| Die Temperature | 230 - 250 | °C |
| Extrusion instructions |
|---|
| The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ColorRx® ACR-0300RX | LTL Color Compounders, Inc. | Acrylic, Unspecified | ColorRx® |
| EPO-TEK® H62 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Korton PFA | Saint Gobain - Norton | PFA | Korton |
| OPNYL OP66GF15 | Ovation Polymers Inc. | Nylon 66 | OPNYL |
| PENTAMID B GV15 GK15 H natur | PENTAC Polymer GmbH | Nylon 6 | PENTAMID B |
