Order Products : sales@su-jiao.com
Evolue™ SP2530S
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Prime Polymer Co., Ltd. |
| Trademark: | Evolue™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zKLhR9_Evolue-SP2530S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Evolue™ SP2530S is a Linear Low Density Polyethylene product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America. Typical application: Plumbing/Piping/Potable Water. Primary characteristic: good stiffness. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.6 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance | > 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Injection Molded) | 56 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, Injection Molded) | 18.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, Injection Molded) | 390 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 240 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 101 | °C | ISO 306 |
| Melting Temperature | 122 | °C | ISO 11357-3 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Fainplast PVC PM 5525 | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| Durethan® BKV 135 DUS008 000000 | LANXESS GmbH | Nylon 6 | Durethan® |
| KEBAFLEX® S 85 A.02 | BARLOG plastics GmbH | TES | KEBAFLEX® |
| LNP™ LUBRICOMP™ DFL369XF compound | SABIC Innovative Plastics Asia Pacific | PC | LNP™ LUBRICOMP™ |
| ULTEM™ 2310 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
