Order Products : sales@su-jiao.com
Andur 2-95 AP
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zHC1Ik_Andur-2-95-AP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 2-95AP is a polyether (PTMG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 95 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by curing Andur 2-95AP with polyols and their combination with Curene 442 and other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 21°C | 12400 | cP | ASTM D2393 |
| 70°C | 650 | cP | ASTM D2393 |
| 100°C | 200 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 6 to 6.4%Specific Gravity, ASTM D792, 70°F: 1.07 g/mlSpecific Gravity, ASTM D792, 212°F: 1.04 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALCOM® PA6 900/13 GF15 MRX45 | ALBIS PLASTIC GmbH | Nylon 6 | ALCOM® PA6 |
| Alpha PVC 2235LM-95 CLEAR 000X | AlphaGary | PVC, Flexible | Alpha PVC |
| HiFill® PA6 GF14 HS L BK | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| Iupilon® ML-400 | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
| Optimum® 800 MF | RAUH Polymers, Inc. | Copolyester | Optimum® |
