Order Products : sales@su-jiao.com
Edgetek™ PA-50GF/000 BK004
| Category: | Nylon 66+Nylon 6I/6T , Polyamide 66 + PA 6I/6T |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Edgetek™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zH9oRS_Edgetek-PA-50GF-000-BK004.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Glass Fiber Reinforced PPA Compound. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.63 | g/cm³ | ISO 1183 |
| Molding Shrinkage | 0.20 - 0.50 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 230 | MPa | ISO 527-2 |
| Flexural Modulus | 16800 | MPa | ISO 178 |
| Flexural Strength | 320 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 11 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.20 mm) | 285 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+15 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.60 mm) | HB | Internal method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 120 | °C | |
| Drying Time | 4.0 - 6.0 | hr | |
| Rear Temperature | 320 - 340 | °C | |
| Middle Temperature | 320 - 340 | °C | |
| Front Temperature | 320 - 340 | °C | |
| Mold Temperature | 120 - 135 | °C |
| Injection instructions |
|---|
| Injection Pressure: MED-HIGHHold Pressure: MED-HIGHScrew Speed: MODERATEBack Pressure: LOW |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Adell PP ES-70 | Adell Plastics, Inc. | PP Homopolymer | Adell PP |
| Flontech® FT-1-FM-1 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| GAPEX® HPP40GR28BK | Ferro Corporation | PP Homopolymer | GAPEX® |
| HAIPLEN H50 T5 | Taro Plast S.p.A. | PP Homopolymer | HAIPLEN |
| EPO-TEK® H62 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
