Order Products : sales@su-jiao.com

Sasol Polymers PP HMR127

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Sasol Polymers
Trademark:	Sasol Polymers PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	zH6KPI_Sasol-Polymers-PP-HMR127.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Features

Medium flow

Specially formulated for processing on both cast and water quenched blown film lines

Very good clarity

Fast migrating slip agent

Low tendency to block

High toughness

Applications
Extrusion

Garment packaging

Flower sleeves

Food and confectionary packaging

General Information
Additive	Anti-caking agent Unspecified additive slip agent
Features	smoothness Homopolymer Anti-caking property Medium liquidity Definition, high Good toughness Compliance of Food Exposure
Uses	Packaging Food packaging
Agency Ratings	EC 1935/2004 FDA 21 CFR 177.1520(a)(3)(i)(c)(1) FDA 21 CFR 177.1520(c) 3.1a
Forms	Particle
Processing Method	Film extrusion Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.905	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	8.5	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Coefficient of Friction			ISO 8295
With itself-dynamic, blown film	0.17		ISO 8295
With itself-static, blown film	0.20		ISO 8295

Films	Nominal Value	Unit	Test Method
Tensile Stress			ISO 527-3
MD : Broken, 50 µm, blown film	44.0	MPa	ISO 527-3
TD : Broken, 50 µm, blown film	40.0	MPa	ISO 527-3
Tensile Elongation			ISO 527-3
MD : Broken, 50 µm, blown film	700	%	ISO 527-3
TD : Broken, 50 µm, blown film	730	%	ISO 527-3
Dart Drop Impact ¹(50 µm, Blown Film)	300	g	ISO 7765-1

Optical	Nominal Value	Unit	Test Method
Gloss (20°, 50.0 µm, Blown Film)	100		ASTM D2457
Haze (50.0 µm, Blown Film)	2.5	%	ISO 14782

Extrusion	Nominal Value	Unit
Hopper Temperature	40.0 - 60.0	°C
Cylinder Zone 1 Temp.	180 - 240	°C
Cylinder Zone 2 Temp.	220 - 260	°C
Cylinder Zone 3 Temp.	240 - 260	°C
Cylinder Zone 4 Temp.	240 - 260	°C
Cylinder Zone 5 Temp.	220 - 260	°C
Melt Temperature	220 - 260	°C
Die Temperature	220 - 240	°C

Extrusion instructions
Processing conditions are for cast film extrusion.

Note Message
1 .	F50

Resin Grade	Manufacturer	Category	Trademark
Stanyl® TW278F10	DSM Engineering Plastics	Nylon 46	Stanyl®
TAROLOY 50 Z1	Taro Plast S.p.A.	PC+PBT	TAROLOY
Hanwha Total PP FH42P	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	PP, Unspecified	Hanwha Total PP
OxyVinyls庐 220F	OxyVinyls, LP	PVC Homopolymer	OxyVinyls®
Auracell® CAP MH	Rotuba Extruders, Inc.	CAP	Auracell®