Order Products : sales@su-jiao.com
ResMart Utility Nylon 6 6
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | ResMart |
| Trademark: | ResMart Utility |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zH4azk_ResMart-Utility-Nylon-6-6.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| General purpose nylon 6 6 that provides a robust property set with a slight tradeoff in natural appearance |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D792 |
| Moisture Content | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 68.9 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | > 10 | % | ASTM D638 |
| Flexural Modulus | 2760 | MPa | ASTM D790 |
| Flexural Strength | 89.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 53 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 199 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 82.2 | °C | |
| Drying Time - Desiccant Dryer | 3.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.18 | % | |
| Processing (Melt) Temp | 277 - 299 | °C | |
| Mold Temperature | 48.9 - 90.6 | °C |
| Injection instructions |
|---|
| Dew Point: 0°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POWERSIL® 3525 VP | Wacker Chemie AG | Silicone | POWERSIL® |
| Alcryn® 2070 NC | Advanced Polymer Alloys | MPR | Alcryn® |
| Globalene® STM866 | Lee Chang Yung Chemical Industry Corp. | PP, Unspecified | Globalene® |
| Hyflon® PFA P220 | Solvay Specialty Polymers | PFA | Hyflon® PFA |
| Plexiglas® 6N | Evonik Industries AG | Acrylic (PMMA) | Plexiglas® |
