Order Products : sales@su-jiao.com

TEKNILID 1256

Category:	Film, Coated Al Foil , Coated Al Foil Film
Manufacturer:	Tekni-Films, a div of Tekni-Plex
Trademark:	TEKNILID
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	zGVSBg_TEKNILID-1256.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

This data sheet describes TEKNILID 1256 product

This lid stock is made with polyolefin (PO) based heat seal (HS) lacquer material for Food, Pharmaceutical, and Cosmetic applications requiring a welded seal to PP along with high oxygen and moisture barrier performance

Aluminum Lidding Foil of 25 µm Hard Temper is used for applications requiring a "push through" feature. You push the product through the foil to access the product.

It is available with custom and standard printing

General Information
Features	Food Contact Acceptable Moisture Barrier Oxygen Barrier
Uses	Cosmetics Lids Non-specific Food Applications Pharmaceuticals
Agency Ratings	FDA Unspecified Rating USP Unspecified Rating
Forms	Film

Films	Nominal Value	Unit
Film Thickness ¹	30.1	µm
Yield	13.6	m²/kg
Tensile Strength - MD ²(Yield)	> 150	MPa
Tensile Elongation - MD ³(Break)	> 1.5	%
Seal Strength ⁴	0.71	N/mm
Oxygen Transmission Rate (23°C, 100% RH)	0.0	cm³/m²/24 hr
Water Vapor Transmission Rate (38°C, 90% RH)	0.0	g/m²/24 hr

Note Message
1 .	Thickness tolerance: ±10%
2 .	of Aluminum
3 .	of Aluminum
4 .	To PP @ 350°F, 40psi, 0.5 sec

Resin Grade	Manufacturer	Category	Trademark
Rilsan® BMNO F15	Arkema	Nylon 11	Rilsan®
Witcom PA6 2008/334	Witcom Engineering Plastics B.V.	Nylon 6	Witcom PA6
Devcon Ultra Quartz™	Devcon	Epoxy	Devcon
Fortron® 6160B4	Celanese Corporation	PPS	Fortron®
K-Resin® SBC KR01	Chevron Phillips Chemical Company LLC	SBC	K-Resin® SBC