Order Products : sales@su-jiao.com
KMI PP KM-053JB
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | KMI Group, Inc. |
| Trademark: | KMI PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zG8Dvb_KMIPPKM053JB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
KM-053JB is for injection molding application. It is an impact copolymer that shows an easy processability and an excellent stiffness combined with good impact strength and appearance. Food Contact Application: KM-053JB meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Characteristics:
|
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 4.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 27.5 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 400 | % | ASTM D638 |
| Flexural Modulus | 1270 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (23°C) | 150 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Distortion | 105 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SHIN-A SER-2001 | SHIN-A T&C | Epoxy | SHIN-A |
| EUROPLEX® Sheet F10 | Evonik Industries AG | PC | EUROPLEX® Sheet |
| ORTHTEK® WF | Greene, Tweed & Co. | PEEK | ORTHTEK® |
| Petrothene® GA601033 | LyondellBasell Industries | LLDPE | Petrothene® |
| Plaslube® HDPE GL5 | Techmer Engineered Solutions | HDPE | Plaslube® |
