Order Products : sales@su-jiao.com
Zytel® 73G30TGI BK267
| Category: | Nylon 6 , NYLON RESIN |
| Manufacturer: | DuPont Performance Polymers |
| Trademark: | Zytel® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zFa5zh_Zytel73G30TGIBK267.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 30% Glass Reinforced, Toughened, Polyamide 6 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Multi-Point Data |
|
| Part Marking Code (ISO 11469) |
|
| Resin ID (ISO 1043) |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.35 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage 1 | ISO 294-4 | |||
| Transverse flow | 1.0 | -- | % | ISO 294-4 |
| Flow | 0.20 | -- | % | ISO 294-4 |
| Water Absorption 2 | ISO 62 | |||
| Saturated, 23°C, 2.00mm | 6.2 | -- | % | ISO 62 |
| Balance, 23°C, 2.00mm, 50% RH | 1.8 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus 3 | 9500 | 6000 | MPa | ISO 527-2 |
| Tensile Stress 4(Break) | 160 | 90.0 | MPa | ISO 527-2 |
| Tensile Strain 5(Break) | 3.3 | 5.0 | % | ISO 527-2 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength 6 | ISO 179/1eA | |||
| -30°C | 10 | 24 | kJ/m² | ISO 179/1eA |
| 23°C | 14 | 18 | kJ/m² | ISO 179/1eA |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, not annealed | 210 | -- | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 206 | -- | °C | ISO 75-2/A |
| Vicat Softening Temperature | 210 | -- | °C | ISO 306/B50 |
| Melting Temperature 7 | 220 | -- | °C | ISO 11357-3 |
| Linear thermal expansion coefficient 8 | ISO 11359-2 | |||
| Flow | 3.0E-5 | -- | cm/cm/°C | ISO 11359-2 |
| Lateral | 1.2E-4 | -- | cm/cm/°C | ISO 11359-2 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Burning Rate 9(1.00 mm) | < 100 | -- | mm/min | ISO 3795 |
| Flammability Classification 10(1.5 mm) | HB | -- | IEC 60695-11-10, -20 | |
| FMVSS Flammability | B | -- | FMVSS 302 |
| Fill Analysis | Dry | Conditioned | Unit | |
|---|---|---|---|---|
| Specific Heat Capacity of Melt 11 | 2200 | -- | J/kg/°C | |
| Thermal Conductivity of Melt 12 | 0.23 | -- | W/m/K |
| Injection | Dry | Unit | |
|---|---|---|---|
| Melt Temperature, Optimum | 270 | °C | |
| Mold Temperature, Optimum | 100 | °C | |
| Drying Recommended | yes | ||
| Hold Pressure Time | 3.00 | s/mm | |
| Maximum Screw Tangential Speed | 200 | mm/sec |
| Fill Analysis | Dry | Conditioned | Unit | |
|---|---|---|---|---|
| Melt Density 13 | 1.31 | -- | g/cm³ | |
| Ejection Temperature | 210 | -- | °C |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time - Desiccant Dryer | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.20 | % | |
| Processing (Melt) Temp | 260 - 280 | °C | |
| Mold Temperature | 70 - 120 | °C | |
| Holding Pressure | 50.0 - 100 | MPa |
| Note Message | |
|---|---|
| 1 . | from 73G300T, Assessed |
| 2 . | from 73G300T, Assessed |
| 3 . | from 73G300T, Assessed |
| 4 . | from 73G30T, Derived from Similar Grade, Calculated |
| 5 . | from 73G300T, Assessed |
| 6 . | from 73G30T, Derived from Similar Grade |
| 7 . | 10°C/min |
| 8 . | from 73G300T, Assessed |
| 9 . | FMVSS 302 |
| 10 . | from 73G300T, Assessed |
| 11 . | from 73G300T, Assessed |
| 12 . | from 73G300T, Assessed |
| 13 . | from 73G300T, Assessed |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Spartech Polycom SCR7F-7015R | Spartech Polycom | PC | Spartech |
| Starex SF-0950S | SAMSUNG SDI CO., LTD. | MABS | Starex |
| Bayfill® EA 6004 (6 pcf) | Covestro - PUR | PUR-Ether/MDI | Bayfill® |
| Elastollan® 1190 A 10 FHF 000 | BASF Polyurethanes GmbH | TPU-Polyether | Elastollan® |
| IDI SMC E-203 | IDI Composites International | TS, Unspecified | IDI SMC |
