Order Products : sales@su-jiao.com
Estane® 58881 TPU
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zBkpG9_Estane-58881-TPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Estane® 58881 TPU is an 80A Polyether-Type Thermoplastic Polyurethane. Features: Excellent low temperature flexibility, and superior abrasion and cut resistance Uses: Extrusion - Wire and cable, Hose and tube & General purpose |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 77 - 83 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus (23°C) | 17.1 | MPa | ASTM D790 |
| Taber Abrasion Resistance (1000 Cycles, 1000 g, CS-17 Wheel) | 3.00 | mg | ASTM D3389 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain, 0.762mm | 4.80 | MPa | ASTM D412 |
| 300% strain, 0.762mm | 6.80 | MPa | ASTM D412 |
| Tensile Strength (Break, 0.762 mm) | 23.4 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 710 | % | ASTM D412 |
| Tear Strength | |||
| 0.762 mm 1 | 54.9 | kN/m | ASTM D624 |
| Cracking | 18 | kN/m | ASTM D470 |
| Compression Set | ASTM D395 | ||
| 23°C, 22 hr | 18 | % | ASTM D395 |
| 70°C, 22 hr | 61 | % | ASTM D395 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -52.0 | °C | DSC |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Cylinder Zone 1 Temp. | 177 | °C | |
| Cylinder Zone 2 Temp. | 182 | °C | |
| Cylinder Zone 3 Temp. | 188 | °C | |
| Cylinder Zone 4 Temp. | 191 | °C | |
| Adapter Temperature | 191 | °C | |
| Die Temperature | 185 - 191 | °C |
| Extrusion instructions |
|---|
| Dew Point: -40°C |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYMAN® (ABS) K1836 | A. Schulman Europe | ABS | POLYMAN® |
| SABIC® LLDPE MG200024 | Saudi Basic Industries Corporation (SABIC) | LLDPE | SABIC® LLDPE |
| XYLEX™ X8303 resin | SABIC Innovative Plastics Europe | PC+Polyester | XYLEX™ |
| LNP™ THERMOCOMP™ 2X95787 compound | SABIC Innovative Plastics | ETFE | LNP™ THERMOCOMP™ |
| Plenco 04527 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
