Order Products : sales@su-jiao.com

Eltex® HD5211GA-B

Category:	HDPE Copolymer , High Density Polyethylene Copolymer
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	Eltex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	z9Y5ym_Eltex-HD5211GA-B.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Eltex® HD5211GA-B is a high-density polyethylene copolymer grade with a narrow molecular weight distribution, specially developed for the injection moulding of caps & closures for the
packaging of beverages. Thanks to high purity and excellent organoleptic properties, this grade is particularly intended for the packaging in direct contact with beverages.
Typical applications

Caps & closures for the packaging of still mineral water, aromatized waters and juices

Benefits and Features

Easy processing

Good impact strength

Low warpage

Grade containing slip agent ensuring easy application and opening. Exposure to direct sunlight has to be avoided as the slip agent is light sensitive and its degradation can give off-taste to the beverage.

Excellent, quality controlled organoleptic properties. In order to preserve the excellent organoleptic properties, it is important not to exceed a melt temperature of 250°C during processing.

General Information
Additive	slip agent
Features	High purity Low warpage Copolymer smoothness Impact resistance, good Workability, good Good sensory characteristics Narrow molecular weight distribution
Uses	Shield Shell
Agency Ratings	European food contact, not rated
RoHS Compliance	Contact manufacturer
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.951	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	11	g/10 min	ISO 1133
Environmental Stress-Cracking Resistance	6.00	hr	ASTM D1693

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	1100	MPa	ISO 527-2/1B
Tensile Stress (Yield)	26.0	MPa	ISO 527-2/1B

Impact	Nominal Value	Unit	Test Method
Charpy Unnotched Impact Strength (23°C)	3.5	kJ/m²	ISO 179

Additional Information
The value listed as Density ASTM D1183, was tested in accordance with ASTM D1872.The value listed as Eniro. Stress Crack Res. ASTM D1693, was tested in accordance with INEOS test methods.Organoleptic Properties, INEOS methods: OK

Resin Grade	Manufacturer	Category	Trademark
Tenite™ Propionate 380A2R30015 Natural, Trsp	Eastman Chemical Company	CAP	Tenite™ Propionate
ASTALON™ S3600UR	Marplex Australia Pty. Ltd.	PC	ASTALON™
Arnite® TZ6 280	DSM Engineering Plastics	PBT	Arnite®
HiFill® PA6/6 0137 S2	Techmer Engineered Solutions	Nylon 66	HiFill®
Sylvin 7833-75 Grey 9280	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin