Order Products : sales@su-jiao.com
Advanced Composites ATX889
| Category: | TPO , Compounded Polypropylene |
| Manufacturer: | Advanced Composites, Inc. |
| Trademark: | Advanced Composites |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | z4aUOu_Advanced-Composites-ATX889.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Advanced Composites ATX889 is a composite polypropylene product, which contains talc filler. It is available in North America. Typical application areas are: automotive industry. Features include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 30 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.00 mm) | 0.80 - 1.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 66 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 23.0 | MPa | ASTM D638 |
| Flexural Modulus | 1720 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -29°C | 56 | J/m | ASTM D256 |
| 23°C | 160 | J/m | ASTM D256 |
| Instrumented Dart Impact 1(-18°C, Total Energy) | 36.2 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 132 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 69.0 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 204 | °C | |
| Middle Temperature | 218 | °C | |
| Front Temperature | 218 | °C | |
| Nozzle Temperature | 216 | °C | |
| Processing (Melt) Temp | 204 - 232 | °C | |
| Mold Temperature | 32.2 - 48.9 | °C | |
| Cushion | 6.35 - 12.7 | mm |
| Injection instructions |
|---|
| Injection Pressure: 10% over max fill pressureHolding Pressure: 50 to 60% of max fill pressureInjection Speed: 1 to 3 inches/secScrew RPM: 1 to 2 secs before mold open |
| Note Message | |
|---|---|
| 1 . | 6.60 m/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200 AR 10 GB 10 | RTP Company | Nylon 66 | RTP |
| PRL PPX-MF-FR1 | Polymer Resources Ltd. | PPE+PS | PRL |
| EnviroPro 2014TF13 | West Michigan Compounding | PP, Unspecified | EnviroPro |
| Koylene CP SRM100NC | Reliance Industries Limited | PP Copolymer | Koylene CP |
| SABIC® PP FPC45 | Saudi Basic Industries Corporation (SABIC) | PP Impact Copolymer | SABIC® PP |
