Tecnoflon® FOR 5381

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	z2ddcT_Tecnoflon-FOR-5381.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECNOFLON® FOR 5381 is a low viscosity cure incorporated fluoroelastomer terpolymer (FKM) with 68.5% fluorine content. Tecnoflon® FOR 5381 is well suited for all applications requiring better chemical resistance and/or long term heat resistance compared to fluoroelastomer copolymers. Tecnoflon® FOR 5381 contains proprietary cure system and special process aid providing superior processability for fast cycles and scorch safety. Some of the basic properties of TECNOFLON® FOR 5381 are: Very good processability Excellent chemical resistance Low compression set Good heat resistance Tecnoflon® FOR 5381 can be used for compression, injection and transfer moulding of shaft seals, valve stem seals, gaskets or any item requiring excellent chemical resistance. This material can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Tecnoflon® FOR 5381 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

Message

TECNOFLON® FOR 5381 is a low viscosity cure incorporated fluoroelastomer terpolymer (FKM) with 68.5% fluorine content. Tecnoflon® FOR 5381 is well suited for all applications requiring better chemical resistance and/or long term heat resistance compared to fluoroelastomer copolymers.
Tecnoflon® FOR 5381 contains proprietary cure system and special process aid providing superior processability for fast cycles and scorch safety.

Some of the basic properties of TECNOFLON® FOR 5381 are:

Very good processability

Excellent chemical resistance

Low compression set

Good heat resistance

Tecnoflon® FOR 5381 can be used for compression, injection and transfer moulding of shaft seals, valve stem seals, gaskets or any item requiring excellent chemical resistance. This material can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers.
Tecnoflon® FOR 5381 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

General Information
Additive	Processing Aid
Features	Fast Molding Cycle Good Chemical Resistance Good Heat Aging Resistance Good Processability High Heat Resistance Low Compression Set Low Viscosity Terpolymer
Uses	Belts/Belt Repair Blending Gaskets Hose Profiles Seals Sheet Valves/Valve Parts
Appearance	Off-White
Forms	Slab
Processing Method	Calendering Compounding Compression Molding Extrusion Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	21	MU
Fluorine Content ²	69	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
Makrolon® ET UV110	Covestro - Polycarbonates	PC	Makrolon®
SCANBLEND FS8 UV4	Polykemi AB	ASA+PC	SCANBLEND
Unichem 6812-02	Colorite Polymers	PVC, Flexible	Unichem
LNP™ STAT-KON™ SE003 compound	SABIC Innovative Plastics	Nylon 12	LNP™ STAT-KON™
Sumiliteresin® PR-50869B	SBHPP	Phenolic	Sumiliteresin®