Order Products : sales@su-jiao.com
YUCLAIR® FT400
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | SK Global Chemical |
| Trademark: | YUCLAIR® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | z1LHkV_YUCLAIR-FT400.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
YUCLAIR FT400 is butene-1 copolymer designed for use in food wrap and casting type packaging film application. YUCLAIR FT400 provides stronger film than ones made from competitive LLDPE film grades. Therefore YUCLAIR FT400 shows superior processibility, gel-free, cling property. YUCLAIR FT400 can be processed readily into casting film using standard extrusion techniques. YUCLAIR FT400 complies with FDA regulations in 21 CFR177.1520 for all food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.8 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 30 | µm | ASTM D746 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 30 µm | 10.8 | MPa | ASTM D882 |
| TD : Yield, 30 µm | 10.8 | MPa | ASTM D882 |
| MD : Break, 30 µm | 34.3 | MPa | ASTM D882 |
| TD : Break, 30 µm | 31.4 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 30 µm | 830 | % | ASTM D882 |
| TD : Break, 30 µm | 850 | % | ASTM D882 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 30 µm | 90 | g | ASTM D1922 |
| TD : 30 µm | 180 | g | ASTM D1922 |
| Spencer Impact (30.0 µm) | 1.27 | J | ASTM D3420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 102 | °C | ASTM D1525 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze (30.0 µm) | 2.0 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 190 | °C | |
| Cylinder Zone 3 Temp. | 230 | °C | |
| Cylinder Zone 5 Temp. | 230 | °C | |
| Die Temperature | 230 | °C |
| Extrusion instructions |
|---|
| Film Extrusion Condition: Screw dia 50, Die width 450Die gap 0.8, Screw RPM 31, L/S 7 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Bapolene® 4072 | Bamberger Polymers, Inc. | PP Homopolymer | Bapolene® |
| Ferro PP MPP20FU16BK | Ferro Corporation | PP, Unspecified | Ferro PP |
| LNP™ THERMOCOMP™ LF005 compound | SABIC Innovative Plastics Asia Pacific | PEEK | LNP™ THERMOCOMP™ |
| POLYfill PP EIP12030RF | Polykemi AB | PP+EPDM | POLYfill |
| Sylvin 9067F3 Red 6261 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
