Order Products : sales@su-jiao.com
KMI PE KM U-542sMR HDPE
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | KMI Group, Inc. |
| Trademark: | KMI PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yzV89Z_KMIPEKMU542sMRHDPE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
KM U-542sMR HDPE Octene Copolymer sHDPE Rotational Molding Resin It has good low temperature impact properties, high stiffness, and a broad processing window. It is very white and enhances part appearance. It is resistant to gas fading. Characteristics: The product contains additives of processing antioxidants and UV stabilizers. It is mainly used in large tanks, septic tanks, and agricultural tanks. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.945 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.7 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (F50) | > 1000 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 23.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 11 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 1030 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| ARM Impact - Low Temperature (6.35 mm) | > 245 | J | ARM |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 63.0 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 43.0 | °C | ASTM D648 |
| Melting Temperature | 127 | °C | DSC |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Andur 8003 AS | Anderson Development Company | PUR-TDI | Andur |
| CERTENE™ LLHF-117XA | Muehlstein | LLDPE | CERTENE™ |
| ICORENE® 9103 GW1 Natural 0000 | ICO Polymers EMEA, A Division of A. Schulman | HDPE | ICORENE® |
| INNOPOL® PP CS 2-3522 TO BU | Inno-Comp Ltd. | PP Copolymer | INNOPOL® PP |
| Sylvin 4280-60 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
