Order Products : sales@su-jiao.com
ESTOPLAST ZK 6220NN01
| Category: | PC , Polycarbonate |
| Manufacturer: | Ester Industries Ltd. |
| Trademark: | ESTOPLAST ZK |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yyYO3f_ESTOPLASTZK6220NN01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polycarbonate 20% Glass Filled , Natural Consumer Durables : Clamp/Channels/Liner Electrical & Electronic: MCB/RCCB/ELCB |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.33 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 6.0 | g/10 min | ASTM D1238 |
| Water Absorption | ISO 62 | ||
| Saturated, 23°C | 0.30 | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 0.15 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 110 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 5.0 | % | ASTM D638 |
| Flexural Strength | 190 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 140 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 155 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 145 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength (2.00 mm) | 15 | kV/mm | ASTM D149 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.5 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 110 - 120 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Rear Temperature | 265 - 275 | °C | |
| Middle Temperature | 285 - 295 | °C | |
| Nozzle Temperature | 285 - 295 | °C | |
| Processing (Melt) Temp | 280 - 290 | °C | |
| Mold Temperature | 60 - 80 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL® eXten D 437P NATURAL | Solvay Engineering Plastics | Nylon 610 | TECHNYL® eXten |
| Ultra Purge 9010 | Moulds Plus International USA, Inc. | Proprietary | Ultra Purge |
| Unipren® Elastomers B3 PRTA010 65A UP316 | Petropol Industry and Trade of Polymers LTDA | PP+EPDM | Unipren® Elastomers |
| Argothane® SS-1495SL-95 | Argotec LLC | TPU, Unspecified | Argothane® |
| Polimid B 15 GF | Poliblend S.p.a. | Nylon 6 | Polimid B |
