Kareline® PLMS7525 Datasheet,PLA,Plasthill Oy-SHANGHAI SUSHENG

Kareline® PLMS7525

Category:	PLA , Polylactic Acid
Manufacturer:	Plasthill Oy
Trademark:	Kareline®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	yrpu2X_Kareline-PLMS7525.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Kareline® PLMS composites are injection mouldable natural fibre reinforced thermoplastic composites, which are biologically degradable, when subjected to the right conditions: Excellent oxidation-, colour- and molecular weight stability in the melt Compostable: The matrix polymer (PLA) used in the composite is certified according to DIN EN 13432:2000-12 and ASTM D 6400. Natural fibres used certified as biodegradable and compostable. Polymer used is on renewable monomers Fibres used are based on sustainable produced, renewable, environment certified (PEFC) forest resources from non-rainforest sources. The matrix plastic of Kareline® PLMS composites is polylactic acid (PLA). The fibre used is ECF bleached long fibre Nordic soft wood pulp (cellulose). The fibre content of Kareline® PLMS composites is 10-50 weight% (for example Kareline® PLMS6040, Kareline® PLMS7030). Customer tailor made grades are also available. PLMS is hydrolysed autocatalytically in humid environments at temperatures above 60°C. The subunit lactic acid is liberated to be used by micro-organisms as food. The speed of biodegradation depends on the thickness of the moulded article and on the ambient temperature. The material can be regarded as CO2-neutral and renewable, because lactic acid used is made out of natural sugar resources, which are in turn made by photosynthesis out of CO2 in plants, just like the fibres used are from renewable forest resources. Kareline® PLMS composites are suitable for e.g. compostable products, products used in cemeteries, disposables and packaging.

Message

Kareline® PLMS composites are injection mouldable natural fibre reinforced thermoplastic composites, which are biologically degradable, when subjected to the right conditions:

Excellent oxidation-, colour- and molecular weight stability in the melt

Compostable: The matrix polymer (PLA) used in the composite is certified according to DIN EN 13432:2000-12 and ASTM D 6400. Natural fibres used certified as biodegradable and compostable.

Polymer used is on renewable monomers

Fibres used are based on sustainable produced, renewable, environment certified (PEFC) forest resources from non-rainforest sources.

The matrix plastic of Kareline® PLMS composites is polylactic acid (PLA). The fibre used is ECF bleached long fibre Nordic soft wood pulp (cellulose). The fibre content of Kareline® PLMS composites is 10-50 weight% (for example Kareline® PLMS6040, Kareline® PLMS7030). Customer tailor made grades are also available.

PLMS is hydrolysed autocatalytically in humid environments at temperatures above 60°C. The subunit lactic acid is liberated to be used by micro-organisms as food. The speed of biodegradation depends on the thickness of the moulded article and on the ambient temperature.

The material can be regarded as CO2-neutral and renewable, because lactic acid used is made out of natural sugar resources, which are in turn made by photosynthesis out of CO2 in plants, just like the fibres used are from renewable forest resources.

Kareline® PLMS composites are suitable for e.g. compostable products, products used in cemeteries, disposables and packaging.

General Information
Filler / Reinforcement	Wood fiber
Features	Low friction coefficient Comstable Updatable resources Sprayable Machinable Good color stability Good wear resistance Thermal insulation Biodegradable Low shrinkage Excellent appearance
Uses	Packaging Compost products
Agency Ratings	ASTM D 6400 DIN EN 13432
Appearance	Brown
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	1.31	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (200°C/10.0 kg)	44	g/10 min	ISO 1133
Melt Volume-Flow Rate (MVR) (200°C/10.0 kg)	38.1	cm³/10min	ISO 1133
Molding Shrinkage	0.40	%
Water Absorption (Equilibrium, 23°C, 50% RH)	0.70	%

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale, 23°C)	121		ISO 2039-2

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress	70.3	MPa	ISO 527-2
Tensile Strain (Break)	2.5	%	ISO 527-2
Flexural Modulus	5100	MPa	ISO 178
Flexural Stress	110	MPa	ISO 178
Flexural Strain at Flexural Strength	2.5	%	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	15	kJ/m²	ISO 179

Thermal	Nominal Value	Unit
Continuous Use Temperature	-25.0 - 85.0	°C

Injection	Nominal Value	Unit
Drying Temperature	75.0	°C
Drying Time	8.0	hr
Rear Temperature	180	°C
Middle Temperature	185	°C
Front Temperature	185	°C
Nozzle Temperature	200	°C
Processing (Melt) Temp	< 210	°C
Mold Temperature	5.00 - 20.0	°C
Injection Pressure	< 100	MPa

Injection instructions
Feed Throat Temperature: <30°C

Resin Grade	Manufacturer	Category	Trademark
RTP 2299 X 121754 A	RTP Company	PEEK	RTP
Flexalloy® OR 9800-45	Teknor Apex Company	PVC Elastomer	Flexalloy®
KOPEL® KP3355	Kolon Plastics, Inc.	TPEE	KOPEL®
Hostaform® C 9021 GV3/10	Celanese Corporation	Acetal (POM) Copolymer	Hostaform®
OnForce™ LFT LF0100-5001 NATURAL	PolyOne Corporation	PUR, Unspecified	OnForce™ LFT