Order Products : sales@su-jiao.com
Sumikon® PM-6230
| Category: | Phenolic , Phenolic |
| Manufacturer: | SBHPP |
| Trademark: | Sumikon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yqDMUC_SumikonPM6230.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SUMIKON PM-6230 Type Black is a Short Glass fiber & Mineral molding compound based on Phenolic Novolac (TS) polymer. It is supplied in the form of Granular/Molding Powder for Molding. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.93 | g/cm³ | JIS K6911 |
| Molding Shrinkage - Flow | 0.33 | % | JIS K6911 |
| Water Absorption (Equilibrium) | 0.050 | % | JIS K6911 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 95.0 | MPa | JIS K6911 |
| Flexural Modulus | 19300 | MPa | JIS K6911 |
| Flexural Strength | 185 | MPa | JIS K6911 |
| Compressive Strength | 250 | MPa | JIS K6911 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 3.8 | kJ/m² | JIS K6911 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 225 | °C | JIS K6911 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Insulation Resistance | JIS K6911 | ||
| -- 1 | 2.0E+11 | ohms | JIS K6911 |
| -- 2 | 8.0E+10 | ohms | JIS K6911 |
| Note Message | |
|---|---|
| 1 . | As molded |
| 2 . | After boiling |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 400 HI UV | RTP Company | PS (HIPS) | RTP |
| TECHNYL® A 222 BLACK 1N | Solvay Engineering Plastics | Nylon 66 | TECHNYL® A |
| VITAMIDE® BF13N2441/1 | Jackdaw Polymers | Nylon 6 | VITAMIDE® |
| Kynar® 3312C | Arkema | PVDF | Kynar® |
| Plexiglas® VH | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Plexiglas® |
