Order Products : sales@su-jiao.com
Alpha PVC 3006R-90 CLEAR 000X
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | Alpha PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yo4Udg_Alpha-PVC-3006R-90-CLEAR-000X.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 3006R-90 Clear 000X is a flexible vinyl compound produced with FDA sanctioned raw materials. Designed with high melt flow for injection molding and easy mold release, this formula showed exceptional resistance to radiation sterilization and passed USP Class VI biocompatibility tests for medical devices. 3006R-90 Clear 000X is recommended for use in drip chambers, tubing caps and connectors. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.25 - 1.29 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.8 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A, 10 seconds, 3.18mm | 87 - 93 | ASTM D2240 | |
| Shaw A, 15 seconds, 6.35mm | 86 - 92 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 100% Secant | 12.8 | MPa | ASTM D638 |
| Tensile Strength (1.91 mm) | 21.9 | MPa | ASTM D638 |
| Tensile Elongation (Break, 1.91 mm) | 290 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 1 | 75.3 | kN/m | ASTM D1004 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -22.0 | °C | ASTM D746 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 143 | °C | |
| Middle Temperature | 154 | °C | |
| Front Temperature | 160 | °C | |
| Nozzle Temperature | 171 | °C | |
| Processing (Melt) Temp | 166 - 177 | °C |
| Injection instructions |
|---|
| Zone 4: 330°FZone 5: 330°F |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 143 | °C | |
| Cylinder Zone 2 Temp. | 154 | °C | |
| Cylinder Zone 3 Temp. | 160 | °C | |
| Cylinder Zone 4 Temp. | 166 | °C | |
| Cylinder Zone 5 Temp. | 166 | °C | |
| Adapter Temperature | 171 | °C | |
| Melt Temperature | 166 - 177 | °C |
| Note Message | |
|---|---|
| 1 . | Graves |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vyncolit® RX®3-1-525F | Vyncolit N.V. | DAP | Vyncolit® |
| 4MID® 9B22130 FRR5H | 4Plas | Nylon 6 | 4MID® |
| ALFATER XL® A65I 2LE0050 | ALBIS PLASTIC GmbH | TPV | ALFATER XL® |
| INSPIRE™ 136 | Braskem Europe GmbH | PP Impact Copolymer | INSPIRE™ |
| Medalist® MD-12130 (PRELIMINARY DATA) | Teknor Apex Company | TPE | Medalist™ |
