Ecoflex® Supersoft 5

Category:	Silicone , Silicone
Manufacturer:	Smooth-On, Inc
Trademark:	Ecoflex® Supersoft
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	yntRkM_Ecoflex-Supersoft-5.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Ecoflex® rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex® rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage. Rubber also cures without a "tacky" surface. Low viscosity ensures easy mixing and de-airing, or you can choose to mix and dispense using our convenient dispensing cartridges. Cured rubber is very soft, very strong and very "stretchy", stretching many times its original size without tearing and will rebound to its original form without distortion. Ecoflex® rubbers are water white translucent and can be color pigmented with Silc Pig® pigments for creating a variety of color effects. You can also add Smooth-On's Silicone Thinner® to further lower the viscosity. THI-VEX® silicone thickener can be added by weight to Ecoflex® 5 or Ecoflex® 00-10 for brushable aplications. Note: THI-VEX® is NOT compatible with Ecoflex® 00-30 or Ecoflex® 00-50. Soft, Softer, Softest . . . Ecoflex® rubbers are based on Smooth-On's Dragon Skin® technology and are currently available in four different hardness': Shore A-5, Shore 00-10, 00-30 and 00-50. They are suitable for a variety of applications including making prosthetic appliances, cushioning for orthotics and special effects applications (especially in animatronics where repetitive motion is required). Ecoflex® 5 has a pot life of 1 minute and a demold time of 5 minutes - Available only in dispensing cartridges.

Message

Ecoflex® rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex® rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage. Rubber also cures without a "tacky" surface. Low viscosity ensures easy mixing and de-airing, or you can choose to mix and dispense using our convenient dispensing cartridges.

Cured rubber is very soft, very strong and very "stretchy", stretching many times its original size without tearing and will rebound to its original form without distortion. Ecoflex® rubbers are water white translucent and can be color pigmented with Silc Pig® pigments for creating a variety of color effects. You can also add Smooth-On's Silicone Thinner® to further lower the viscosity. THI-VEX® silicone thickener can be added by weight to Ecoflex® 5 or Ecoflex® 00-10 for brushable aplications. Note: THI-VEX® is NOT compatible with Ecoflex® 00-30 or Ecoflex® 00-50.

Soft, Softer, Softest . . . Ecoflex® rubbers are based on Smooth-On's Dragon Skin® technology and are currently available in four different hardness': Shore A-5, Shore 00-10, 00-30 and 00-50. They are suitable for a variety of applications including making prosthetic appliances, cushioning for orthotics and special effects applications (especially in animatronics where repetitive motion is required).

Ecoflex® 5 has a pot life of 1 minute and a demold time of 5 minutes - Available only in dispensing cartridges.

General Information
Features	Good Strength Good Stretchability Good Tear Strength Low Shrinkage Low Viscosity Soft
Uses	Dental Applications Prosthetics
Appearance	Translucent
Processing Method	Casting

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.07	g/cm³	ASTM D1475
Specific Volume	0.932	cm³/g	ASTM D1475

Additional Information	Nominal Value	Unit	Test Method
Mixing Ratio	1A:1B by volume
Operating Temperature	-54 to 232	°C

Physical	Nominal Value	Unit	Test Method
Molding Shrinkage - Flow	< 0.10	%	ASTM D2566

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	5		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (100% Strain)	0.103	MPa	ASTM D412
Tensile Strength (Break)	2.41	MPa	ASTM D412
Tensile Elongation (Break)	1000	%	ASTM D412
Tear Strength ¹	13.1	kN/m	ASTM D624

Electrical	Nominal Value	Unit	Test Method
Dielectric Strength	> 14	kV/mm	ASTM D149

Thermoset	Nominal Value	Unit	Test Method
Pot Life	1.0	min	ASTM D2471
Thermoset Mix Viscosity	13000	cP	ASTM D2393
Demold Time	5.0	min

Note Message
1 .	Die B

Resin Grade	Manufacturer	Category	Trademark
Braskem PE ML4400N	Braskem	LLDPE	Braskem PE
Fainplast PVC ART 10	Fainplast Compounds S.r.l	PVC, Rigid	Fainplast PVC
HiFill® PEI GF20	Techmer Engineered Solutions	PEI	HiFill®
LEXAN™ FST3403 resin	SABIC Innovative Plastics	PC	LEXAN™
Petrothene® NA960070	LyondellBasell Industries	LDPE	Petrothene®