| Category: | PF , Phenol Formaldehyde Resin |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ylD1m2_Generic-PF.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PF This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.41 to 1.50 | g/cm³ | ISO 1183 |
| Apparent Density | 0.58 to 0.88 | g/cm³ | ISO 60 |
| Molding Shrinkage (23°C) | 0.35 to 0.90 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus (23°C) | 6500 to 9110 | MPa | ISO 178 |
| Flexural Stress (23°C) | 84.9 to 95.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 1.3 to 1.5 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | 6.0 to 7.0 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (8.0 MPa, Unannealed) | 105 to 116 | °C | ISO 75-2/C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+10 to 1.0E+11 | ohms | IEC 60093 |
| Volume Resistivity (23°C) | 1.0E+11 to 1.0E+12 | ohms·cm | IEC 60093 |
| Relative Permittivity (23°C) | 12.0 | IEC 60250 | |
| Dissipation Factor (23°C) | 0.25 to 0.30 | IEC 60250 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Spartech Polycom PP5325 | Spartech Polycom | PP Homopolymer | Spartech |
| Starex BF-0677HF | SAMSUNG SDI CO., LTD. | MABS | Starex |
| ADMER™ AT1404E | Mitsui Chemicals Europe GmbH | PP, Unspecified | ADMER™ |
| APICAL 500AV | Kaneka Corporation | Film, PI | APICAL |
| Epic Urethane S7214 | Epic Resins | PUR, Unspecified | Epic Urethane |