Category: | Silicone , Silicone |
Manufacturer: | NuSil Technology |
Trademark: | NuSil |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | yhazoh_NuSil-CV4-2289-1.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space
Comments: Non-flowable |
General Information | |
---|---|
Features |
|
Uses |
|
Agency Ratings |
|
Thermoset | Nominal Value | Unit | |
---|---|---|---|
Thermoset Components | |||
Part A | Mix Ratio by Weight: 1.0 | ||
Part B | Mix Ratio by Weight: 1.0 | ||
Tack Free Time | 10.0 | hr |
Additional Information | Nominal Value | Unit | |
---|---|---|---|
Cure System | Platinum |
Uncured Properties | Nominal Value | Unit | |
---|---|---|---|
Color | White | ||
Viscosity | |||
-- 1 | 1000 | Pa·s | |
-- 2 | 1300 | Pa·s | |
Curing Time (150°C) | 0.50 | hr | |
Pot Life | 30 | min |
Cured Properties | Nominal Value | Unit | |
---|---|---|---|
Shore Hardness (Shore A) | 30 | ||
Tensile Strength | 4.48 | MPa | |
Tensile Elongation at Break | 400 | % |
Note Message | |
---|---|
1 . | Part B |
2 . | Part A |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
PRL PC-G10-(color)-1 | Polymer Resources Ltd. | PC | PRL |
Silopren® LSR 3485/50 | Momentive Performance Materials Inc. | Silicone Rubber, LSR | Silopren® |
Cabofor® 24 NATURALE | SO.F.TER. SPA | PC | Cabofor® |
Anjaflam® 150-FR/GF10 | Almaak International GmbH | PC | Anjaflam® |
LNP™ STAT-KON™ RE0039 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ STAT-KON™ |