Order Products : sales@su-jiao.com

PolyMax™ LC

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Heritage Plastics, Inc.
Trademark:	PolyMax™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ygSLhT_PolyMax-LC.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Specifically formulated to maintain the cost and performance balance in a wide variety of blow molding applications - improved cycle times, ESCR; reduced shrink, warpage. Suitable Applications: blow molding furniture oil bottles juice and dairy bottles garbage cans flower pots Environmentally Beneficial Calcium carbonate is a plentiful, natural mineral and can be used to effectively displace a significant portion of the petrochemical based component in the targeted application. The improved productivity and the lower energy consumption awarded by using our concentrates all help to minimize the carbon footprint of the end product. Regulatory Compliance The ingredients in our concentrates are approved for use in direct food contact packaging and are heavy metals free making them compliant with regulations such as California Proposition 65 and CONEG.

Message

Specifically formulated to maintain the cost and performance balance in a wide variety of blow molding applications - improved cycle times, ESCR; reduced shrink, warpage.

Suitable Applications:
blow molding
furniture
oil bottles
juice and dairy bottles
garbage cans
flower pots

Environmentally Beneficial
Calcium carbonate is a plentiful, natural mineral and can be used to effectively displace a significant portion of the petrochemical based component in the targeted application. The improved productivity and the lower energy consumption awarded by using our concentrates all help to minimize the carbon footprint of the end product.

Regulatory Compliance
The ingredients in our concentrates are approved for use in direct food contact packaging and are heavy metals free making them compliant with regulations such as California Proposition 65 and CONEG.

General Information
Filler / Reinforcement	Calcium Carbonate, 81% Filler by Weight
Features	Food Contact Acceptable High ESCR (Stress Crack Resist.) Low Shrinkage Low Warpage
Uses	Blow Molding Applications Bottles Fruit Juice Bottles Furniture
Processing Method	Blow Molding

Physical	Nominal Value	Unit	Test Method
Density	1.95	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.0	g/10 min	ASTM D1238
Moisture Content	< 1000	ppm

Resin Grade	Manufacturer	Category	Trademark
PRE-ELEC® TPE 1502	Premix Oy	TPE	PRE-ELEC®
SureSpec PET-80C	Genesis Polymers	PET	SureSpec
Ultralloy™ 3310-28	Hapco Inc.	TP, Unspecified	Ultralloy™
NORYL™ WCD795 resin	SABIC Innovative Plastics Asia Pacific	PPE+TPE	NORYL™
LNP™ LUBRICOMP™ RX03643H compound	SABIC Innovative Plastics	Nylon 66	LNP™ LUBRICOMP™