Order Products : sales@su-jiao.com
ALKAMIX™ MB6006
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | ALKAMIX™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ygQzOF_ALKAMIX-MB6006.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ALKAMIX MB6006 is a processing aid masterbatch based on a fluoropolymer compound at a concentration of 5 percent. ALKAMIX MB6006 can be added to linear low density polyethylene (LLDPE) during extrusion to eliminate melt fracture (Sharkskin) type extrusion defects. The level required will vary according to extrusion equipment and type of LLDPE being used, however the recommended addition level is between 1 and 2 percent. ALKAMIX MB6006 is compatible with the process aid used in Alkatuff film polymers. The maximum level of addition of MB6006 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 5 percent, when added to a polyethylene formulation free of any other additives. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.945 | g/cm³ | ASTM D1505 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRL ABS-G15 | Polymer Resources Ltd. | ABS | PRL |
| TUFNYL® SGF 30 WHITE | SRF Ltd. | Nylon 6 | TUFNYL® |
| Amodel® A-1145 HS | Solvay Specialty Polymers | PPA | Amodel® |
| K-Prene GLC 6060 | Technovinyl Polymers India Ltd. | TPE | K-Prene |
| Geon™ Vinyl Rigid Molding M3530 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Molding |
