Order Products : sales@su-jiao.com
Flexalloy® 9100-45
| Category: | PVC Elastomer , Polyvinyl Chloride Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Flexalloy® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yfaPIN_Flexalloy-9100-45.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Flexalloy® 9100-45 is a Polyvinyl Chloride Elastomer (PVC Elastomer) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion or injection molding. Important attributes of Flexalloy® 9100-45 are:
Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.11 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.0 to 2.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 45 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Break | 8.27 | MPa | |
| 100% Strain | 2.55 | MPa | |
| Tensile Elongation (Break) | 390 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 1 | 22.8 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 23°C, 22 hr | 23 | % | |
| 70°C, 22 hr | 57 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -56.1 | °C | ASTM D746 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Suggested Max Regrind | 20 | % | |
| Rear Temperature | 160 to 177 | °C | |
| Middle Temperature | 160 to 177 | °C | |
| Front Temperature | 160 to 177 | °C | |
| Mold Temperature | 23.9 to 51.7 | °C | |
| Back Pressure | 0.345 to 1.03 | MPa | |
| Screw L/D Ratio | 20.0:1.0 to 24.0:1.0 | ||
| Screw Compression Ratio | 2.0:1.0 to 3.0:1.0 |
| Note Message | |
|---|---|
| 1 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULADUR® E GF 35 | A. Schulman Europe | PET | SCHULADUR® |
| DENILUB Y 15G 0Mo | Vamp Tech | Nylon 66 | DENILUB |
| Geon™ Vinyl Rigid Extrusion L8761 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Extrusion |
| Plaslube® POM HO TL1 | Techmer Engineered Solutions | Acetal (POM) Homopolymer | Plaslube® |
| Sylvin 5150-80 Grey 9424 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
