Order Products : sales@su-jiao.com
Jam PE 60507
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Jam Petrochemical Company |
| Trademark: | Jam PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ycmxLm_Jam-PE-60507.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Jam PE 60507 is a High Density Polyethylene product. It can be processed by injection molding and is available in Africa & Middle East. Typical application: Containers. Primary characteristic: homopolymer. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.958 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.5 to 8.5 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | > 30.0 | MPa | |
| Break, Compression Molded | 13.0 | MPa | |
| Tensile Elongation (Break, Compression Molded) | 350 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | > 1500 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | > 36 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | > 127 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Matrixx 90N5156 | The Matrixx Group, Inc. | PC+ABS | Matrixx |
| STRANOX PP-ST40%LFT | Oxford Polymers | PP, Unspecified | STRANOX |
| Tisester® PBT UNR | Tisan | PBT | Tisester® |
| Ultramid® B3G8 BK00564 | BASF Corporation | Nylon 6 | Ultramid® |
| DENIFORM 0037-M | Vamp Tech | Acetal (POM) Copolymer | DENIFORM |
